Home
Boating
Cooler Accessories
45 Quart Cooler Slide

45 Quart Cooler Slide

SKU

As low as: $439.95

Stop wrestling your cooler out from under your leaning post. This slide system lets you pull your 45 quart cooler out smoothly for full access, then lock it back in place to keep your deck clean and organized.

Product Details

Effortless Access:
Smooth sliding system allows you to pull your cooler out for full lid clearance - no more dragging or lifting
Secure Locking System:
Spring-loaded mechanism locks the slide in both extended and stowed positions for safety while underway
Universal Compatibility:
Designed to fit most popular 45 quart coolers including YETI, RTIC, and Engel models using integrated foot holders
Smooth Operation:
Polyurethane wheels provide easy, controlled movement under load without damaging your deck
Space-Saving Design:
Mounts under leaning posts or seats to keep your deck clutter-free while maintaining quick access
Durable Construction:
Built from marine-grade King Starboard with corrosion-resistant hardware for long-lasting performance
65 Quart Size Available:
A 65 Quart Cooler Slide is also available for larger coolers.

Tech Specs

Compatibility	most 45-quart coolers including YETI, RTIC, and Engel models
Material	King Starboard, Polyurethane wheels
Operation	Single central pull-handle design
Clearance Required	Approximately 1.5" above cooler lid
Mounting	(12) #8 x 1.25" FH screws (sold separately; through-bolting recommended)

Installation Instructions & Drawing

Cooler Slide Installation

Installing a boat cooler slide is easier than you might think, but still requires some minor drilling and adjustment.

Before drilling any holes for installation, dry-fit the cooler slide with the cooler in place to ensure smooth slide operation and proper lid clearance.

Mounting to Your Deck

To mount the slide to your deck, find the proper mounting location and mark the mounting holes on your deck.
Drill these out using counter sink bits; this will reduce any cracking in your gelcoat when you tighten the screws.
Once drilled out, the slide can be secured with (12) #8 x 1.25" FH screws. When possible, through bolting is preferred.

Before you complete your install, be sure to seal your screw holes. Sealing and countersinking your deck screws is vital to a proper installation. Failure to seal your holes can allow moisture to penetrate your deck coring, causing issues down the road. Countersinking can prevent ugly cracks from occurring when you tighten down your hardware. These cracks are typically cosmetic but can spread and cause issues down the road.

View Cooler Slide Drawing

FAQ

What is the value of a cooler slide for boats?

Cooler slides add value in multiple ways. First, they allow you to easily pull your cooler out from under your leaning post so you can open the lid all the way for full access. Then, the cooler can be slid back out of the way under the leaning post and locked in place, maximizing cockpit space. Second, by removing the need to drag your cooler on your deck, you greatly reduce wear and tear on the deck of your boat.

Who makes a high-quality cooler slide for boats?

There are relatively few manufacturers of cooler slides. Among them, Boat Outfitters is an excellent choice, manufacturing high-quality, universal fit slides from King Starboard and marine-grade hardware in a variety of colors.

How much clearance do I need to add a cooler slide under my leaning post?

The required clearance varies slightly among manufacturers, but generally speaking, a cooler slide will raise your cooler about 1.5 inches. So you need at least 1.5 inches of clearance above the lid when your cooler is sitting on deck.