Aluminum Framed 4 Tray Tackle Box

SKU
13770-50011F-CP
$493.78
Industry Leader
Industry
Leader
Helping Boaters
Helping Boaters Since 1979
Honest Expert Advice
Honest, Expert Advice
Satisfaction Guarantee
Satisfaction Guarantee
Critical Dimensions
Measures 16.313" tall x 16.875" wide
Fits Hole Cutout 15.438" tall x 16" wide
Required Depth 11"
Need a Custom Size?
Most units can be customized to fit your specs. Call (866)-633-7961 to discuss!
» Request Quote
Features

(2) 3700 Plano Tray Tackle Boxes 14" wide x 9" deep x 2" tall
(2) 3730 Plano Tray Tackle Boxes 14" wide x 9" deep x 3.25" tall

This part mounts through the inside flange of the aluminum frame

Aluminum framed units with inside mounting provide an extremely low profile flush look. This mounting style requires at least 1/2" of panel thickness. If you do not have this wall thickness available, you must add build up strips around the inside of your cutout.

Download Full Installation Instructions

Inside Mounting (with 1/2" of Fiberglass)
  1. Carefully measure and cut your hole cutout.
  2. Evaluate wall thickness to confirm 1/2" of material to screw in to.
  3. Place the box in to your cutout.
  4. Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box.
  5. Fasten #6 x 1 1/4" screws in to your pilot holes until box is secure.

Inside Mounting (without 1/2" of Fiberglass)
  1. Carefully measure and cut your hole cutout.
  2. Screw mounting strips around the inside opening to build up your available wall thickness.
  3. Place the box in to your cut out.
  4. Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box.
  5. Fasten #6 x 1 1/4" screws in to your pilot holes until box is secure.
Copyright © 2010-2024 Boat Outfitters. All rights reserved.