Aluminum framed access doors have a sleek low profile frame which sits nearly flush (only 1/8" proud) of your mounting surface. Interior mounting holes hide all fasteners. Upgrading to a high gloss acrylic door material makes your door to blend into the surrounding gel coat for a flush, sleek "high end" look.
Low profile marine grade powder coated frame
Mounts via inside flange for clean "no-fastener" look
Available fabricated from King Starboard or high gloss acrylic
Includes weather resistant integrated seal included
Requires hole cutout with radius corners
Hinge Direction Options
Height - Hinging Left
Height - Hinging Right
Width - Hinging Down
Width - Hinging Up
Color Options
Color accuracy can vary considerably on computer monitors and printers. Use the above images as a general guide of relative color differences. When color match is critical, please consider purchasing a sample chain.
Below is our "best guess" color match by boat brand:
Important Note
Many builders have gone through color changes and utilize different color schemes on different boats. The above list should not be considered a definitive resource. Use these suggestions at your own risk and please consider purchasing a sample chain if color match is critical.
Starboard Sample Chain Because parts are built to order, we cannot accept any returns on account of color discrepancy. We offer sample chains at cost for all customers. If you are unsure which color best matches your boat, we highly recommend purchasing a set!
Add To Cart
Vented Louvers
Vented Louvers Add vented louvers for increased air flow to the the area behind your door. Our vented louvers are cut via slightly offset parallel mills cut into the back and front of the door. This allows air flow while minimizing the amount of water blown through the door.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
Starboard Sample Chain
