Upgrade your outboard engine with a cutting-edge Flush Port Quick Connect, designed to replace the OEM flush port seamlessly and permanently. This innovative accessory is a game-changer for every boater, providing unparalleled convenience and efficiency in maintaining and flushing your outboard engine.
Hassle-free & time saving, simply twist off the cap, connect the hose, flush, disconnect, and twist the cap back on
Long lasting, made of UV-resistant, marine-grade materials designed to withstand the harsh marine environment
Leak proof, engineered with a double O-ring and locking cap to ensure a secure, leak-free seal every time
Available for select Mercury, Yamaha, & Suzuki motors
Mercury Quick Connect
Compatible with all Four Stroke, Racing, Pro XS, and Verado series engines & all horsepower ratings from 75hp - 500hp - including V8 and V10 models.
Comes with (1) Mercury Male Quick Connect, (1) Female Hose Quick Connect (Blue), (1) 90-degree Elbow (goes inside the cowling to ensure no kinks are in the Mercury flush hose; use if necessary), (1) Wrench for Tightening, and (1) Stainless Steel Hose Clamp
Yamaha Quick Connect
Compatible with Yamaha Outboard Engines 150 - 425hp (with a flush port) - NOT COMPATIBLE with Yamaha Outboards 50 - 115hp or 450hp
Comes with (2) Female Quick Connects and (1) Male Quick Connect (Double O-Ring to ensure no leaks)
Suzuki Quick Connect
Compatible with all Four-stroke Suzuki outboard engines from 25hp to 350hp
Comes with (1) Suzuki Male Quick Connect, (1) Female Hose Quick Connect (Blue), and (1) Wrench for tightening
Installation Instructions
Mercury Quick Connection Instructions
Remove the OEM Mercury flush port plug, unscrew the Mercury OEM plug from the 3/4" female hose outlet, remove the lanyard from the engine hose, thread in your new Seamule Flush Port Quick Connect to the flush port, reinstall the Seamule Flush Port Quick Connect into the engine cowling, give it a 1/4" turn clockwise to lock it in place.
Helpful Tip: Remove cowling and inspect the flush hose for any kinks in the hose. If a kink exists, replace the Mercury 3/4" female hose outlet with the provided elbow. Orient the elbow inside the cowling to ensure no kinks are in the Mercury flush hose. (To help insert the 90-degree elbow, lube the barb or use a heat gun on the flush hose.)
Yamaha Quick Connection Instructions
Unthread your Yamaha flush port and thread in your new Seamule female quick connect on the male side. Take your new Seamule male quick connect piece and thread into female side of Yamaha flush port. The second Seamule female quick connect goes on the end of your water supply.
Suzuki Quick Connection Instructions
Remove the OEM Suzuki flush port plug. Thread in your new Seamule Flush Port Quick Connect. Use the included wrench to tighten.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
