Phoenix Pure Sinewave Inverter

Name: Phoenix Pure Sinewave Inverter
SKU: 260-6166-CP

SKU

As low as: $134.95

Power sensitive onboard electronics from your boat’s battery with clean, pure-sine AC, backed by proven reliability and built-in protections.

Product Details

Clean Sine Power:
Pure sine wave output keeps sensitive electronics and appliances running smoothly on board.
Variant Selection Guide:
Choose input voltage to match your batteries, power rating for your load, and VE.Direct for app monitoring.
Proven Converter Design:
Full bridge plus toroidal transformer topology delivers dependable performance in marine use.
Robust Safety Protections:
Short-circuit proof and over-temperature protected to prevent damage during overloads or high ambient heat.
Remote Control Ready:
Two-pole connector accepts a remote on/off switch for easy placement at a helm, cabin, or service panel.
Certified For Installations:
Meets EN-IEC 60335-1, EN-IEC 62109-1, UL 458 and EMC EN 55014 and IEC 61000 series requirements.

Frequency	50/60Hz
Input Voltage	12 VDC (12V 375W, 12V 500W); 24 VDC (24V 1200W, 24V 800W)
Output Voltage	120 VAC (12V 375W, 12V 500W, 24V 1200W, 24V 800W); 120VAC +/- 3% (24V 250W)
Output Power	1600W (12V 1600W); 375W (12V 375W); 500W (12V 500W); 800W (12V 800W, 24V 800W); 1200W (24V 1200W)
Continuous Power at 25°C	250VA (24V 250W)
Continuous Power at 25°C / 40°C	200 / 175W (24V 250W)
Peak Power	400W (24V 250W)
Standard AC Outlets	NEMA 5-15R (24V 1200W)
Operating Temperature Range	-40 to +65 °C with fan-assisted cooling (12V 1600W)
Humidity	Max. 95% non-condensing (24V 250W)
Maximum Cable Cross-Section	10 mm² / AWG8 (12V 1600W, 24V 250W)
Protection Category	IP21 (12V 1600W, 24V 250W)
Item Weight	2.4 kg / 5.3 lbs (12V 1600W, 24V 250W)
Overall Dimensions	86 x 165 x 260 mm (3.4" x 6.5" x 10.2") (12V 1600W, 24V 250W)
Safety	EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)
EMC	EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3