Lift out doors provide quick partial access to your opening while still allowing you to remove the door for full access as needed. It is a great solution for tight spaces with limited room for door swing. The most common example being below your helm where a standard door might not have the clearance to fully open without hitting your seat.
Hinges down across middle of door for quick partial opening access
Easily lifts out of lower retainer for full access to opening
Frames pre-drilled with countersunk mounting holes for quick easy installation
Fabricated from King Starboard - The Marine Industry's Premier Plastic Sheet
Ideal for tight spaces with limited room for door swing
Color accuracy can vary considerably on computer monitors and printers. Use the above images as a general guide of relative color differences. When color match is critical, please consider purchasing a sample chain.
Below is our "best guess" color match by boat brand:
Important Note
Many builders have gone through color changes and utilize different color schemes on different boats. The above list should not be considered a definitive resource. Use these suggestions at your own risk and please consider purchasing a sample chain if color match is critical.
Starboard Sample Chain Because parts are built to order, we cannot accept any returns on account of color discrepancy. We offer sample chains at cost for all customers. If you are unsure which color best matches your boat, we highly recommend purchasing a set!
Add To Cart
Vented Louvers
Vented Louvers Add vented louvers for increased air flow to the the area behind your door. Our vented louvers are cut via slightly offset parallel mills cut into the back and front of the door. This allows air flow while minimizing the amount of water blown through the door.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
Starboard Sample Chain
