Teak Framed Glove Box
SKU
13770-80048
$356.78
Built To Order
Usually ships in 3-5 Business Days
When will this arrive?
Critical Dimensions
| Measures | 7.75" tall x 11.5" wide |
| Fits Hole Cutout | 6.375" tall x 10.125" wide |
| Required Depth | 6" |
Need a Custom Size?
Most units can be customized to fit your specs. Call (866)-633-7961 to discuss!
» Request Quote
Most units can be customized to fit your specs. Call (866)-633-7961 to discuss!
» Request Quote
Features
Interior Dimensions 8" wide x 4.50" deep x 4.375" tall
This part is supplied predrilled with inside mounting holes
Inside mounting allows you to mount your box without any visible fastenersThis mounting style requires at least 3/4" of panel thickness. If you do not have this wall thickness available, you must add build up strips around the inside of your cutout.
Download Full Installation Instructions
Inside Mounting (with 3/4" of Fiberglass)
- Carefully measure and cut your hole cutout.
- Evaluate wall thickness to confirm 3/4" of material to screw in to.
- Place your box into your cutout.
- Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box.
- Fasten #8 1 1/4" screws in to your pilot holes until box is secure.
Inside Mounting (without 3/4" of Fiberglass)
- Carefully measure and cut your hole cutout.
- Screw mounting strips around the inside opening to build up your available wall thickness.
- Place the box in to your cut out.
- Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box .
- Fasten #8 1 1/4" screws in to your pilot holes until boat storage box is secure.
