Two Knife, Plier, and Boga Grip Holder

Awesome products!

Haven ;t used it

Great product that gave me a safe, out of the way place to keep my knives, pliers and fish grip. It keeps things organized and out of the way, yet readily available when I need the tools it holds.

Fast service good quality

Works great with plenty of mounting options and locations. I’m not always fishing in the same position on the boat so I can always have my pliers or knife handy anywhere on the boat!

I purchased 2 of these. I can put one on each side of the boat and don't have to run around looking for the tools. The reason I only gave it a 3 is the suction cups. The are installed poorly. The screws come loose (strip off cup) and the glue they put on to hold it in the recess doesn't hold. Also the cups come with a release tap but they position it to where you can use it. I would have to use a fillet knife to lift the edge of the cup up to release it. Came to an end with the way they were made when one of them fell off and one of the fillet knifes found a place in the side of my foot. I took them apart this past weekend and cleaned and dried them. Put the cups back on with 3M 5200. Will see if it works.

Love the construction of the holder and easy to install

This knife and tool holder exceeds my expectations. It holds well even in rough water. It also fits in flush on the console of my Robalo. I am going to get one for the other side of the console soon.

The boga grip and plier holder works great and keeps the tools easily accessible. The suction cups have worked great even in rough conditions.

Works great! Mounted it on my tackle storage unit.

Not enough suction to
Hold 2 knives and pliers.

This is a nice little holder for the inside of my center console. I mounted this directly to the door to save space. It's a perfect fit and does its job well

Very sturdy, would recommend it to a friend

A good quality and good design holder. Nice and solid well made. I really like it. Had it several months.

Works well so far. Should have chosen white/white rather than attic white, it does not match my console.

Well made Only drawback is the knife holder will not accept a thick handled knife.

Great products that allow you both functionality and additional space on your boat, no matter the size of boat.

Was a little hesitant to purchase this but when I received it is is very high quality and fits my boat very well. I love this holder, better than any other one I have owned or seen before!!

Great product really enjoy how convenient storing equipment is now.

Love em, easy to install and work great.

I’m going to order another !

have not used it yet but appears functional

The holder suctions to my console perfectly and my 30lb Boga grip fits snug until it’s ready to be used. Having this keeps everything within arms reach while landing a fish. The quality is top notch, as expected from Boat Outfitters. Now I am looking to purchase a cup holder/storage to match it.

I can’t give a full 5 stars because the suction cups didn’t hold for me. It fell off twice before I even put the boat in the water. It was on my leaning post/livewell which is smooth gel coat. I ended up just removing the cups, countersinking the holes and mounting with stainless screws.

Well made and got it quickly, I may need another, so I'm not looking for tools lost on the floor of the boat, when you really need them

This worked great for me, I bought the one with the suction cups and they really hold well.

Works perfect for my needs

fast shipping, good products good service
can not go wrong with Boat Outfitters

I purchased with the suction cups so I can try it in different locations on my PathFinder 2200. The tool holder is built out of quality material. The suction cups have kept it attached to the boat securely. It looks nice and holds knives safely and securely. It makes reaching for the boga grip easy.

Highly recommend.

Nice setup but the bogo Grip didn’t fit. The whole was to small.

Great quality and versatility on my Mako 192. Keeps knives and boga stored safely yet easy to grab when I need them.

Just what I was looking for! It is a perfect fit for my 30lb boga!

Everything stays in place in some really nasty water. It’s also easiley accesible. It doesn’t hold the bogs grip 30lb model perfectly but it holds it enough where it stays and doesn’t rattle. To me that’s all that matters

Excellent quality and very functional. Have been using mine for over a month now and am completely pleased with the material and function. fishing tools stay put even in rough water and the fact that it holds a boga grip is a definite plus. In addition, I ordered the unit in black as a special order which perfectly matches my boat interior. Highly recommend this product.

Definitely recommend it.

It was actually just what I was looking for. Worked out great and gets rid of a lot of clutter in the console area.

Top quality product! Great customer service as well!

...That is a GREAT item............. ! I mounted my 2...1 on the forward port side bulkhead and (1) on the Aft starboard bulkhead. Great quality!!

Well made and everything fits including my boga grip. Keeps everything within arms reach and I don’t need to hunt during the “heat of battle”

Works exactly as expected. Easy install. Solid construction.

Very useful and just what I needed. Reasonably priced considering their other products are expensive. Holds a lot of tools / knives / lures for the size and is well designed and very well built. Highly recommended.

Very practical for my use to fishing for salmon. I will use the Boga grip holder for scissors instead. Wish the color could have been different as a match to the boat but was not willing to pay for the upgrade which would have given them more business from my friends on purchasing this item.