- EFFORTLESS ACCESS: Central pull-handle auto disengages lock for easy access - no more struggling or dragging
- SECURE LOCKING SYSTEM: Spring loaded handle automatically locks in both extended and stored position for safety and convenience while underway
- UNIVERSAL COMPATIBILITY: Pre-milled base accommodates most popular 65-quart coolers including YETI, RTIC, and Engel models
- SMOOTH ROLLING: Polyurethane wheels glide smoothly under load - preventing grinding and scratching your deck surface
- SPACE MAXIMIZING: Consolidates cooler storage under your leaning post while maintaining full accessibility, optimizing valuable deck space
- COLOR MATCH: Available in multiple King Starboard colors to perfectly complement your boat's existing gel coat
65 Quart Cooler Slide
SKU
As low as:
$364.99
As low as:
Regular Price
Product Details
Color Options
White/White
Arctic White
Seafoam
Fish White*
Dolphin Gray*
Glacier Gray*
Black*
Buckskin*
Dark Mocha*
Smoke*
Starboard Sample Chain
Made-to-order parts are non-returnable for color issues. To ensure accuracy, we recommend purchasing a Starboard sample chain. Add To Cart
Made-to-order parts are non-returnable for color issues. To ensure accuracy, we recommend purchasing a Starboard sample chain. Add To Cart
*Special Order Colors: These "special order" colors require a surcharge. Call for availability. Color accuracy may vary by monitor/printer. Use swatches as a guide. For exact matching, consider a sample chain.
Installation Instructions & Drawing
Cooler Slide Installation
Mounting to Your Deck
View Cooler Slide Drawing
Installing a boat cooler slide is easier than you might think, but still requires some minor drilling and adjustment.
Before drilling any holes for installation, dry-fit the cooler slide with the cooler in place to ensure smooth slide operation and proper lid clearance.
Mounting to Your Deck
- To mount the slide to your deck, find the proper mounting location and mark the mounting holes on your deck.
- Drill these out using counter sink bits; this will reduce any cracking in your gelcoat when you tighten the screws.
- Once drilled out, the slide can be secured with (12) #8 x 1.25" FH screws. When possible, through bolting is preferred.
Before you complete your install, be sure to seal your screw holes. Sealing and countersinking your deck screws is vital to a proper installation. Failure to seal your holes can allow moisture to penetrate your deck coring, causing issues down the road. Countersinking can prevent ugly cracks from occurring when you tighten down your hardware. These cracks are typically cosmetic but can spread and cause issues down the road.
View Cooler Slide Drawing
FAQ
Cooler slides add value in multiple ways. First, they allow you to easily pull your cooler out from under your leaning post so you can open the lid all the way for full access. Then, the cooler can be slid back out of the way under the leaning post and locked in place, maximizing cockpit space. Second, by removing the need to drag your cooler on your deck, you greatly reduce wear and tear on the deck of your boat.
There are relatively few manufacturers of cooler slides. Among them, Boat Outfitters is an excellent choice, manufacturing high-quality, universal fit slides from King Starboard and marine-grade hardware in a variety of colors.
The required clearance varies slightly among manufacturers, but generally speaking, a cooler slide will raise your cooler about 2 inches. So you need at least 2 inches of clearance above the lid when your cooler is sitting on deck.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
