Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Black (2025) Plexiglas Acrylic Plastic Sheet

SKU
13770-42104
Quick Ship
Usually ships in 1-3 Business Days
When will this arrive?
Note: The calculator automatically adds a $5 cut charge to any piece less than 2 sq/ft.
Black acrylic is commonly used for doors, hatches and acrylic dash surrounds. Acrylic sheet has a high gloss shiny finish that closely matches the boat's fiberglass gel coat. This allows you to fabricate components parts such as doors, dash panels, etc. that blend into the boat for a flush clean look.

Key Features:

  • High gloss shiny finish matches your boats gel coat
  • Can be heat formed for bent applications
  • Requires secondary polishing operation for edges to match surface gloss
  • Acrylic drill bit required for drilling through holes

Frequently Bought Together

  1. Black (2025) Plexiglas Acrylic Plastic Sheet
  2. +
  3. Premium  Acrylic Drill Bit
Total price: $0.00
  • This item: Black (2025) Plexiglas Acrylic Plastic Sheet $0.00

Reviews
5.0 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
17
0
0
0
0
100% Professional. High Quality
Hands down the best customer service you could ask for. Needed a custom dash panel for the boat and needed it quickly so we could get on the water. Andrew worked with me every step of the way to make that happen on time. Couldn't be happier my new dash panel.
Before and After
User submitted image
August 12, 2019
Good quality, fair price
Before and after photos, good quality and perfect size
After photo
Before photo
July 12, 2019
Purchased
2 months ago
Its what I orderd!
July 9, 2019
Purchased
2 months ago
Great Service
Incredibly fast service on a custom made piece of acrylic. Very nicely quality finish on the edges.
June 26, 2019
Purchased
2 months ago
Shipped fast, exactly what I was looking for.
June 13, 2019
Purchased
2 months ago
1/2” acrylic
Very happy with it. Matches perfectly with the new screens. Awesome customer service and at a great price.
Before....
After
June 6, 2019
Purchased
4 months ago
Great product, easy to use. I cut my own piece, I used 1/4 inch, had plenty of support behind my specific project, however 1/4 in is flimsy if not supported correctly
User submitted image
User submitted image
User submitted image
User submitted image
May 23, 2019
Precise cut= happy customer.
Precise cut from boat outfitters. I also chose the polished edges, which was a nice touch!

I always use these guys. They are high level experts!
User submitted image
Added Apr 4, 2019
April 4, 2019
Purchased
5 months ago
Exactly what I was looking for and prompt shipping I will definitely use Boat Outfitters again
January 29, 2019
Purchased
7 months ago
Amateur Boat Builder
Good product but overpriced by about 25%
January 25, 2019
Purchased
7 months ago
Questions / Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions Browse 11 questions and 10 answers
I need to piece cut for my dash. Do you accept a traced template?
A shopper on Apr 21, 2018
BEST ANSWER: Great question! We would love to work with you on your project and would be able to create something for you from a template or provided dimensions. Please reach out to us to get started. We look forward to hearing from you.
Is this material extruded or cast acrylic?
A shopper on Dec 15, 2017
BEST ANSWER: I'd be happy to help! Almost all of our acrylic is cast acrylic as it is typically a higher quality material than extruded acrylic, and is more predictable (as far as expansion and contraction) when heating and bending. Thank you!
Can you drill through this with a wood or metal bit and if so what kind of bit do you use? And after I drill a pilot hole can I use a very fine tooth jigsaw to cut out the templates for my display screens
Todd K on May 18, 2019
BEST ANSWER: Hi Todd,
I used my piece of acrylic for a helm on a boat. Did exactly what you are questioning. Drilled pilot holes with sharp wood bits and cut out large space for a GPS unit. Very easy to do. Keep plastic on sheet or put down blue masking tape. Also drilled 2" holes with hole bit. All very easy. Don't go too close to the edge as it becomes very week and can break. I know from experience. Go slow and you should have great success. Good luck.
Ric
I need a surround or adapter plate for a new Simrad NSS9 unit to go on my dash to replace a slightly different Lowrance HDS8 unit dash cutout. Can an acrylic plate be made?
William L on Aug 16, 2019
BEST ANSWER: William - Absolutely! Please give us a call at (866) 633-7961 and we'd be happy to help you with this.
Would this be able to be cut to use for a replacement entry hatch?
William B on Jun 23, 2019
BEST ANSWER: Hey William, great question. Yes, acrylic can definitely be used for entry hatches. Thanks!
I have a 2012 searay 410 sundancer. The starboard forward salon plexiglass “window”—black color in the shape of a triangle popped out on a rough ride. I need to replace this plexiglass panel. Can you do this?
Matthew L on Aug 29, 2018
BEST ANSWER: Great question. Yes, This is something we would be able to do. Please give us a call to discuss the specifics of your project.
What do you need to cut this?
Todd B on Aug 19, 2018
BEST ANSWER: Great question. We cut this material on the router to produce the best results. That said, at home, you can use most of the same tools you would use for general woodworking to make cuts - the higher tooth count on the blade the better.
can i send you a digital template for a piece of acrylic plexiglass i need cut?
Robert S on Feb 26, 2018
BEST ANSWER: Hi Robert,
This is certainly possible. We will send you an email shortly to help you to get your project started. For future projects like this, you can call us directly at (866) 633-7961 and we would be happy to help you.
Thank you, Robert!
Is this this acrylic suitable for overhead electronic box on a center console boat?
A shopper on Nov 11, 2017
BEST ANSWER: Absolutely! This the same material we use in house when building OEM parts for over 200 boat builders. Please let us know if you have any other questions or if there is anything else we can do for you.
is the black also translucent as for port-lites?
Jim B on May 17, 2019
I need a 24"x24" for an outside table. Would this material be able to be engraved without ruining the laser? If so what material would you suggest? Wood would be expensive as it would require marine grade epoxy which is very expensive..
Gail S on Mar 26, 2019
Copyright © 2019 Boat Outfitters. All rights reserved.