VIEW
152-3205
Boat Windshield Fastener
SKU
152-3205
$9.57
In Stock
Orders before 2PM EST ship same day!
When will this arrive?
Key Features:
- Helps Make Installing and Removing Boat Windshields
- Base Mounts to the Boat and the Quick Twist Fastener Passes Thru Windshield
- Great for Preventing Broken Windshields in Shipping, Installation and for Cleaning
- Molded of UV stable polymer that will not corrode
- Two male configurations: wing nut style, slotted flush head
- Plate Measures 2.1875" Long x 1.125" Wide
- Striker Measures 1.5" Overall Length
Reviews
4.5 / 5.0
6 Reviews
Windshield fastener
Seems to be a good product.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Awesome product better then the original ones
Awesome they were easier to put in then I thought luckily the screws that hold the mounting plate for the fasteners did not have any nuts holding them on otherwise it would of been a !@#$% trying to get them on instead just plain old tight fitting screws that were easy to remove and the fasteners fit perfectly thank you for the awesome product shipping and customer service I will defiantly use you guys again??
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect fit. Cost was a bit too high I think but I needed it.
Perfect fit. Would have bought 2 more if cost wads lower.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect
The fastener works with the fixtures [the oval piece] that was on the boat but could work equally well wit its own fixture. Good product and goodf delivery.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Banner Marine
Great for removable windshield! Boat fits under garage door now.
Mounted a removable solar pannel on top of dash as well.
Way too expensive for a made in China product. Shouldnt cost more then $1.50 apiece.
I'm sure that the price will come down when competitors pick up on a good design.
Mounted a removable solar pannel on top of dash as well.
Way too expensive for a made in China product. Shouldnt cost more then $1.50 apiece.
I'm sure that the price will come down when competitors pick up on a good design.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
August 4, 2014
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Questions / Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 6 answers
Question Regarding Boat Windshield Fastener. Sku# 152-3205. Please advise the length of the shaft that goes through the windshield and locks into opposite side of console. Also, If there is a washer on the end of the shaft to prevent the shaft from being loose and droppng out upon removal of the windshield?
BEST ANSWER: Great question! The distance from the compressed spring loaded washer to the back of the holding tabs that rotate behind the mounting plate is 0.6". The overall length of the shaft is slightly over 1". There is a washer that is included.
- Reply
- Inaccurate
- Daliah D Staff on Feb 15, 2018
Will these fit my H. R. O. Inc. windshield on my 1998 Starcraft fishing boat with a side console ?
BEST ANSWER: If what you have looks like what you are getting my guess it should.
May need a little trimming/adjusting to make the fit.
May need a little trimming/adjusting to make the fit.
- Reply
- Inaccurate
- JOHN W T on Jul 26, 2019
- Purchased on Mar 30, 2019
Can these mounts be used on an Alumacraft windshield 2220004907 ?
BEST ANSWER: I have to imagine you could use them on any windshield. It is a simple quick disconnect. It was a direct fit on my triton.
- Reply
- Inaccurate
- Brian on Jun 4, 2019
- Purchased on Sep 8, 2018
What is the thickness of the base?
BEST ANSWER: Great Question!
The base thickness is 0.5" and plate thickness is 0.1", the base is 2.1"H x 1.1"W. Hope this helps.
The base thickness is 0.5" and plate thickness is 0.1", the base is 2.1"H x 1.1"W. Hope this helps.
- Reply
- Inaccurate
- David K Staff on Jun 1, 2018
Do u have to drill a bigger hole in ur windshield? Do u show an install instruction on line?
BEST ANSWER: Hello Eddie, installation would vary based on your existing windshield and hole diameter but if you would like to discuss your project specifics please feel free to give us a call and one of our sales reps would be happy to assist you.
- Reply
- Inaccurate
- Brian O Staff on May 15, 2018
How many fasteners come in a pkg?