- Marine Formula™ will take the headache out of replacing and resealing deck hardware, hatches and thru-hull fittings
- Specially formulated patented mixture that cleans and removes adhesives and sealants used on and inside the boat
- Works well at taking off tape of all kinds, black rub marks, super glues, chewing gum on the carpet, tree sap, silicone rubber, and 3M 5200, just to name a few
- Easy to use, it only takes minutes for the adhesives to lose their grip
- Even easier to clean up with just soap and water, followed by denatured alcohol
- Safe on fiberglass, gel coat, powder coating, aluminum, 2-part paint systems, polycarbonate hatches, clearcoat, and leather
- Available in 10 oz Aerosol Can
Debond Marine Adhesive Remover
SKU
260-3206
$40.99
Regular Price
Ships FREE on orders over $150!
Trusted Industry
Leader
Leader
Helping Boaters
since 1979
since 1979
Honest Expert
Advice
Advice
100% Satisfaction
Guarantee
Guarantee
Product Details
FAQ
Polyurethane adhesive/sealants form long interlocking chains of molecules when they come into contact with the surfaces to be bonded together. These molecule chains are what forms the bond with the surface (fibreglass, metal, wood, etc.) Marine Formula™ penetrates into the polyurethane adhesive sealant (such as 3M™ Marine 5200) and, through a chemical process, begins the process of breaking the interlocking molecule chains. When the chains are broken, the adhesive loses its sticking power.
There are many variables including temperature, evaporation rates, and product being removed. A one inch piece of 3M™5200 can be removed in as little as two minutes and I removed an air conditioner that was adhered with a one foot+ thick piece of 3M™5200 in 29 nine minutes. A big help in speeding up a larger job is the use of a wedge to increase lifting pressure that will help Marine Formula™ contact the adhesive or silicone rubber. Marine Formula™ works best above 65°F and kept in the shade if outdoors to slow down evaporation.
Keep a damp rag on hand and don't let DeBond 2000 Marine Formula™ run to where you might not want it. It will not hurt your gel-coat but will remove decals and decal adhesives as well as soft paints, varnish etc. Just test on an inconspicuous spot with one drop if you are not sure. Soap and water and/or Isopropyl Alcohol will stop the action.
This product should not be used around heat or flame. Remember that this aerosol can is under pressure. Do not puncture or incinerate the can even if you believe that it is empty. Do not store the product at temperatures above 120°F. Be sure to protect all surrounding areas and objects prior to spraying. Always use this product in a well ventilated area. If it is not possible to use the product in a well ventilated area, we recommend that you use NIOSH/MSHA approved Chemical/Mechanical type filter system. Small amounts of the product on skin are generally not harmful. If the product comes into contact with skin you should wash the affected area with soap and water. We recommend the use of safety glasses or goggles to protect eyes from contact with this product. In case of eye contact, immediately flush with water for at least 15 minutes. If irritation persists, get medical attention.