- MARINE-GRADE PROTECTION: PVC dock edging absorbs impacts and prevents marking, safeguarding both your vessel and dock from costly damage
- UV-STABILIZED DURABILITY: Premium weather-resistant material maintains strength and appearance through years of sun exposure and marine conditions
- HASSLE-FREE INSTALLATION: Straight sections install easily with standard #8 stainless steel screws and washers, requiring minimal tools and expertise
- SHIPS STRAIGHT & READY: Unlike coiled alternatives, our straight sections arrive ready to install without fighting memory or dealing with misshapen product
P-Profile Dock Bumper
SKU
As low as:
$5.00
As low as:
Regular Price
Product Details
Tech Specs
| Material | Marine-grade PVC with UV stabilization |
| Design | Straight Sections, non-coiled |
| Mounting | #8 fasteners (Sold Separately) |
| Length | 5', 10', 8" sample |
Drawing
Installation Instructions
Required Tools:
Drill
#7 or #8 Phillips Flat Head Screws
Flat or Finish Washers
⅛” Drill Bit
Do a dry fit of each piece before beginning installation to determine the exact placement, alignment, and orientation of each piece. The top lip of the P-Bumper edge will install on the top of the dock. Mark your positions on the dock and edging to help guide your installation
Drill pilot holes every 6” thru the top and bottom of the bumper and the dock once placement is determined using a ⅛” drill bit. Start on one end
Using 1-1.5” long stainless-steel flat head wood screws and flat or finish washers to mount the edging to the dock
If using the Foam Corner Bumper, install the dock edges 1-1/8” off the corner of the dock to allow space for the foam corner to be installed. Fit foam corner over installed P-Bumper and fasten in indicated areas on the top and bottom of the foam corner
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
