- Lightweight and Impact-Resistant, 50% lighter than glass and shatter-resistant, making it a safer and more manageable option
- Weather Resistant, with high durability and UV resistance, acrylic mirror sheets are suitable for both indoor and outdoor use
- High Reflectivity, provides a clear and sharp reflection, comparable to glass mirrors
- Ease of Fabrication, easily cut, drilled, and shaped using standard tools, making it perfect for custom projects
- Cost-Effective, more affordable than traditional glass mirrors, reducing project costs without sacrificing quality
- Ideal for replacing your interior mirrors, signage, safety mirrors, and DIY projects
- Requires secondary polishing operation for edges to match surface gloss
- Acrylic or plastic drill bit required for drilling through holes
Plexiglas Acrylic Mirror Plastic Sheet
SKU
13770-81013
$0.00
Regular Price
Note: The calculator automatically adds a $5 cut charge to any piece less than 2 sq/ft.
Trusted Industry
Leader
Leader
Helping Boaters
since 1979
since 1979
Honest Expert
Advice
Advice
100% Satisfaction
Guarantee
Guarantee
Product Details
Installation Tips
Mounting Surface
General Guidelines
Cutting & Forming
Adhesives & Gluing
Storage
Usage Restrictions
Cleaning & Maintenance
Protective Masking
Safety Precautions
Additional Notes
These recommendations are provided based on reliable data and intended to assist in your project. However, suitability should be verified based on specific applications and conditions.
- Use a smooth, rigid, flat backing like 5/8" or 3/4" MDF.
- Ensure the surface is clean, dry, and free of flaking or powdery paint.
General Guidelines
- Acrylic is flexible and may show slight distortions; it’s not suitable for precise image reflection.
- Choose an appropriate thickness before cutting.
Cutting & Forming
- Acrylic mirror cannot be thermoformed but can be cold-formed.
- Suitable cutting methods include routing, sawing, or laser cutting. It cannot be die-cut.
Adhesives & Gluing
- Test adhesives on expendable pieces 72 hours before application; some adhesives may damage the mirrored backing.
- Avoid solvent gluing at edges to prevent cracking (crazing).
Storage
- Store in a cool, dry area, flat and overwrapped with plastic to minimize moisture absorption.
- Variable temperatures and humidity can cause warping.
Usage Restrictions
- Not recommended for glazing, shower doors, outdoor use, or high-humidity environments.
- For outdoor use, seal edges with silicone to protect the mirror backing from moisture and salt spray.
Cleaning & Maintenance
- Clean with mild soap and a damp, soft cloth. Avoid window cleaners or abrasive chemicals.
- Remove grease or tar using hexane or kerosene.
- Maintain surface gloss with plastic polish and a flannel cloth.
- Remove fine scratches with plastic scratch remover; deeper scratches may require wet sanding with 400-grit sandpaper.
Protective Masking
- Keep protective masking on until fabrication is complete. If additional masking is required, apply over the supplied film.
Safety Precautions
- Acrylic is a combustible thermoplastic; keep it away from flames and high heat sources.
Additional Notes
- Excess material ("overage") is included; inspect edges before cutting.
- Warping due to humidity is a characteristic of acrylic and should be considered in design.
These recommendations are provided based on reliable data and intended to assist in your project. However, suitability should be verified based on specific applications and conditions.