Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

WEST SYSTEM 105 Epoxy Resin®

SKU
As low as: $51.47

Product Details

  • Low-viscosity, clear resin designed to wet out and bond to wood, reinforcing fabrics, foam, other composites, and a variety of metals
  • Easy to use - cures in a wide temperature range to form a high-strength solid with excellent moisture resistance
  • Pairs with your choice of WEST SYSTEM hardeners and fillers to dial in strength, cure time, and thickness for your job
  • Great for bonding, coating, or laminating—fills gaps and bridges voids when mixed with WEST SYSTEM fillers
  • Easily sanded and shaped after curing for clean, professional results
  • Apply with a roller for a smooth, self-leveling surface or build up multiple coats to create a tough, stable base for paints and varnishes
  • Formulated without volatile solvents—won’t shrink after curing, has a relatively high flash point, and no strong solvent odor
  • Resin viscosity is approximately 1000 centipoise (cP) at 72°F (22°C)
  • Compatible with separately sold 205 Fast, 206 Slow, 207 Special Clear, and 209 Extra Slow Hardeners, as well as 404 High-Density, 407 Low-Density Fillers and Metering Pump Set

Storage & Shelf Life

Store at room temperature. Keep containers closed to prevent contamination. With proper storage, resin and hardeners should remain usable for many years. After a long storage period, verify the metering accuracy of the pumps. Mix a small test batch to assure proper curing. Over time, 105 Resin will thicken slightly and will therefore require extra care when mixing. Repeated freeze/thaw cycles during storage may cause crystallization of 105 Resin. Warm resin to 125°F and stir to dissolve crystals. Hardeners may darken with age, but physical properties are not affected by color. If clear finishing, be aware of a possible color shift if very old and new hardeners are used on the same project.

WEST SYSTEM User Manual

Data Sheets

Contact Us

Need support?
We're just a message away!