Need a Custom Size?
Most units can be customized to fit your specs.
Call (866)-633-7961 to discuss! » Request Quote
Features
(4) Drawers 3.125" tall x 13.25" deep x 13.25" wide
(1) Top Storage Area - 5.25" tall x 32.75" wide x 5.25" deep
(1) Bottom Storage Area - 4" tall x 32.75" wide x 5.25" deep
Installation Instructions
This part is supplied predrilled with inside mounting holes
Inside mounting allows you to mount your box without any visible fastenersThis mounting style requires at least 3/4" of panel thickness. If you do not have this wall thickness available, you must add build up strips around the inside of your cutout.
Evaluate wall thickness to confirm 3/4" of material to screw in to.
Place your box into your cutout.
Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box.
Fasten #8 1 1/4" screws in to your pilot holes until box is secure.
Inside Mounting (without 3/4" of Fiberglass)
Carefully measure and cut your hole cutout.
Screw mounting strips around the inside opening to build up your available wall thickness.
Place the box in to your cut out.
Drill pilot holes through the pre-drilled holes on the inside flange of your tackle box .
Fasten #8 1 1/4" screws in to your pilot holes until boat storage box is secure.
Color Options
White/White
Arctic White
Seafoam
Fish White*
Dolphin Gray*
Glacier Gray*
Black*
Buckskin*
Dark Mocha*
Smoke*
Color Match by Brand
Below is our "best guess" color match by boat brand:
Important Note
Many builders have gone through color changes and utilize different color schemes on different boats. The above list should not be considered a definitive resource. Use these suggestions at your own risk and please consider purchasing a sample chain if color match is critical.
Starboard Sample Chain Made-to-order parts are non-returnable for color issues. To ensure accuracy, we recommend purchasing a Starboard sample chain.Add To Cart
*Special Order Colors: These "special order" colors require a surcharge. Call for availability. Color accuracy may vary by monitor/printer. Use swatches as a guide. For exact matching, consider a sample chain.
Attention Note
This product no longer uses lid stays and instead uses Cable Retainer Straps
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
